Los rodillos locos de flecha muerta cónicos The WINertiaTM AV mantienen constante tracción en los rodillos locos de aluminio de flecha muerta WINertiaTM AV de altas velocidades de banda, son construidos en “Air Vents” que remueve aire atrapado 7.5 veces más rápido que cualquier otro rodillo loco en el mercado.

Con 15 veces la capacidad de estacionamiento de aire, nuestro rodillo de eje muerto ventilado mantiene tracción constante.

Elimina los problemas de rayado, deslizamiento, agrupamiento y movimiento de sitio a sitio de la banda.

El WINertiaTM AV supera el ranurado en espiral, corchos, cintas de goma y rodillos locos estándar.

El WINertiaTM puede ser usado en muchas aplicaciones de rodillos locos.

Se utiliza el WINertiaTM AV en codificadores, rebobinadores, impresores de alta velocidad, y equipo de conversión corriendo a velocidades de 500 a 3400FPM.

Los resultados del tercer grupo de pruebas independientes prueban que los rodillos locos de aluminio de flecha muerta WINertiaTM mantienen constante tracción de banda a través de múltiples velocidades de banda.

Los rodillos locos equipados con otra tecnología pierden tracción y deslizamiento debido al aire atrapado entre la banda y el rodillo loco.

  • 2.0 x 1.5

    Lightweight Aluminum Dead Shaft Ider Roller
    • 2.0 x 1.5
    • Finished Roll Diameter Wide Web: 1.960/1.880" Narrow Web: 1.865/1.845"
      Total Indicator Run Out (TIR) .0005 Per Foot (.002 Min)
      Surface Finish 16 ra, 32 ra, 64ra, or 125 ra
      Bore Available Ring Clip Bore (Bearing protrusion available)
      Bearing Sizes Available Self-Adjusting: .75
      Bearing Type Self Adjusting, ER, Free Spin
      Balanced to Spec G6.3 No Balance
      Shaft Diameter Tolerance -.0005 / -.0015 (Ex: 1.0" = .9995/ .9985)
      End Cap No end cap
      Approximate weight .100 Pounds Per Inch (without shaft or bearings)
      Available Coatings WINtrac Coatings

  • 2.5 x 2

    Aluminum Dead Shaft Idler Roller
    • 2.5 x 2
    • Finished Roll Diameter 2.5 - 2.36
      Total Indicator Run Out (TIR) .0005 Per Foot (.002 Min)
      Surface Finish 16 ra, 32 ra, 64 ra, or 125 ra
      Bore Available Ring Clip Bore (Bearing protrusion available)
      Bearing Sizes Available 1.0", 1.25", 25 mm
      Bearing Type Self-Adjusting, ER, Free Spin
      Balanced to Spec G6.3 2000 FPM (as as specified)
      Shaft Diameter Tolerance -.0005/-.0015 (Ex:1.0"=.9995/.9985)
      End Cap No end cap
      Approximate weight .1500 Pounds Per Inch (without shaft or bearings)
      Available Coatings WINtrac Coatings

  • 3.1 x 1.5

    Lightweight Aluminum Dead Shaft Ider Roller
    • 3.1 x 1.5
    • Finished Roll Diameter Wide Web: 3.040/2.985" Narrow Web: 3.005/2.985"
      Total Indicator Run Out (TIR) .0005 Per Foot (.002 Min)
      Surface Finish 16 ra, 32 ra, 64ra, or 125 ra
      Bore Available WINlock Bore (Bearing protrusion available)
      Bearing Sizes Available .75"
      Bearing Type Self Adjusting, ER, Free Spin
      Balanced to Spec G6.3 2000 FPM (or as specified)
      Shaft Diameter Tolerance -.0005 / -.0015 (Ex: 1.0" = .9995/.9985)
      End Cap Standard
      Approximate weight .150 Pounds Per Inch (without shaft or bearings)
      Available Coatings WINtrac Coatings

  • 3 x 2

    Lightweight Aluminum Dead Shaft Ider Roller
    • 3 x 2
    • Finished Roll Diameter 3.140/3.050
      Total Indicator Run Out (TIR) .0005 Per Foot (.002 Min)
      Surface Finish 16 ra, 32 ra, 64 ra, or 125 ra
      Bore Available WINlock Bore (Bearing protrusion available)
      Bearing Sizes Available Self-Adjusting. 1.0, 1.25", 25mm
      Bearing Type Self Adjusting, ER, Free Spin
      Balanced to Spec G6.3 2000 FPM (or as specified)
      Shaft Diameter Tolerance -.0005 / -.0015 (Ex: .9995/.9985)
      End Cap No end cap
      Approximate weight .209 Pounds per Inch (without shaft and bearings)
      Available Coatings WINtrac Coatings

  • 3.5 x 2

    Lightweight Aluminum Dead Shaft Ider Roller
    • 3.5 x 2
    • Finished Roll Diameter Wide Web: 3.570/3.470" Narrow Web: 3.470/3.450"
      Total Indicator Run Out (TIR) .0005 Per Foot (.002 Min)
      Surface Finish 16 ra, 32 ra, 64 ra, or 125 ra
      Bore Available WINlock Bore (Bearing protrusion available)
      Bearing Sizes Available 1", 1.25" or 25mm
      Bearing Type Self Adjusting, ER, Free Spin
      Balanced to Spec G6.3 2000 FPM (or as specified)
      Shaft Diameter Tolerance -.0005 / -.0015 (Ex: .9995/.9985)
      End Cap Standard
      Approximate weight .284 Pounds Per Inch (without shaft or bearings)
      Available Coatings WINtrac Coatings

  • 4 x 2

    Lightweight Aluminum Dead Shaft Ider Roller
    • 4 x 2
    • Finished Roll Diameter Wide Web: 4.100/3.975" Narrow Web: 3.955/3.935"
      Total Indicator Run Out (TIR) .0005 Per Foot (.002 Min)
      Surface Finish 16 ra, 32 ra, 64 ra, or 125 ra
      Bore Available WINlock Bore (Bearing protrusion available)
      Bearing Sizes Available 1.0", 1.25", 25mm
      Bearing Type Self Adjusting, ER, Free Spin
      Balanced to Spec G6.3 2000 FPM (or as specified)
      Shaft Diameter Tolerance -.0005 / -.0015 (Ex: .9995/.9985)
      End Cap Standard
      Approximate weight .346 Pounds Per Inch (without shaft and bearings)
      Available Coatings WINtrac Coatings

  • 4 x 3

    Lightweight Aluminum Dead Shaft Ider Roller
    • 4 x 3
    • Finished Roll Diameter Wide Web: 4.220/4.100" Narrow Web: 4.100/4.080"
      Total Indicator Run Out (TIR) .0005 Per Foot (.002 Min)
      Surface Finish 16 ra, 32 ra, 64 ra, or 125 ra
      Bore Available WINlock Bore (Bearing protrusion available)
      Bearing Sizes Available 1.5", 2.0", or 40mm
      Bearing Type Self Adjusting, ER, Free Spin
      Balanced to Spec G6.3 2000 FPM (or as specified)
      Shaft Diameter Tolerance -.0005 / -.0015 (Ex: 1.5" = 1.4995/1.4985)
      End Cap No end cap
      Approximate weight .443 Pounds Per Inch (Without shaft and bearings)
      Available Coatings WINtrac Coatings

  • 4.5 x 2

    Lightweight Aluminum Dead Shaft Ider Roller
    • 4.5 x 2
    • Finished Roll Diameter Wide Web: 4.550/4.420" Narrow Web: 4.330/4.310"
      Total Indicator Run Out (TIR) .0005 Per Foot (.002 Min)
      Surface Finish 16 ra, 32 ra, 64 ra, or 125 ra
      Bore Available WINlock Bore (Bearing protrusion available)
      Bearing Sizes Available 1.0", 1.25", 25mm
      Bearing Type Self Adjusting, ER, Free Spin
      Balanced to Spec G6.3 2000 FPM (or as specified)
      Shaft Diameter Tolerance -.0005 / -.0015 (Ex: .9995/.9985)
      End Cap Standard
      Approximate weight .435 Pounds Per Inch (without shaft and bearings)
      Available Coatings WINtrac Coatings

  • 4.5 x 3

    Aluminum Dead Shaft Idler Roller
    • 4.5 x 3
    • Finished Roll Diameter Wide Web: 4.550/4.420" Narrow Web: 4.330/4.310"
      Total Indicator Run Out (TIR) .0005 Per Foot (.002 Min)
      Surface Finish 16 ra, 32 ra, 64 ra, or 125 ra
      Bore Available WINlock Bore (Bearing protrusion available)
      Bearing Sizes Available 1.5", 2.0", or 40mm
      Bearing Type Self Adjusting, ER, Free Spin
      Balanced to Spec G6.3 2000 FPM (or as specified)
      Shaft Diameter Tolerance -.0005 / -.0015 (Ex: 1.5" = 1.4995/1.4985)
      End Cap No end cap
      Approximate weight .473 Pounds Per Inch (without shaft or bearings)
      Available Coatings WINtrac Coatings

  • 5 x 2

    Aluminum Dead Shaft Idler Roller
    • 5 x 2
    • Finished Roll Diameter Wide Web: 5.150/5.000" Narrow Web: 4.955/4.935"
      Total Indicator Run Out (TIR) .0005 Per Foot (.002 Min)
      Surface Finish 16 ra, 32 ra, 64 ra, or 125 ra
      Bore Available WINlock Bore (Bearing protrusion available)
      Bearing Sizes Available 1.0", 1.25", 25mm
      Bearing Type Self Adjusting, ER, Free Spin
      Balanced to Spec G6.3 2000 FPM (or as specified)
      Shaft Diameter Tolerance -.0005 / -.0015 (Ex: 1.4995/1.4985)
      End Cap Standard
      Approximate weight .502 Pounds Per Inch (without shaft or bearings)
      Available Coatings WINtrac Coatings

  • 5 x 3

    Aluminum Dead Shaft Idler Roller
    • 5 x 3
    • Finished Roll Diameter Wide Web: 5.070/4.970" Narrow Web: 4.965/4.945"
      Total Indicator Run Out (TIR) .0005 Per Foot (.002 Min)
      Surface Finish 16 ra, 32 ra, 64 ra, or 125 ra
      Bore Available WINlock Bore (Bearing protrusion available)
      Bearing Sizes Available 1.5", 2", 40mm
      Bearing Type Self Adjusting, ER, Free Spin
      Balanced to Spec G6.3 2000 FPM (or as specified)
      Shaft Diameter Tolerance -.0005 / -.0015 (Ex: 1.4995/1.4985)
      End Cap No End cap
      Approximate weight .502 Pounds Per Inch (without shaft or bearings)
      Available Coatings WINtrac Coatings

  • 6 x 2

    Aluminum Dead Shaft Idler Roller
    • 6 x 2
    • Finished Roll Diameter Wide Web: 6.190/6.000" Narrow Web: 5.980/5.960"
      Total Indicator Run Out (TIR) .0005 Per Foot (.002 Min)
      Surface Finish 16 ra, 32 ra, 64 ra, or 125 ra
      Bore Available WINlock Bore (Bearing protrusion available)
      Bearing Sizes Available 1.0 , 1.25", 25mm
      Bearing Type Self Adjusting, ER, Free Spin
      Balanced to Spec G6.3 2000 FPM (or as specified)
      Shaft Diameter Tolerance -.0005 / -.0015 (Ex: 1.0" = .9995/9985)
      End Cap Standard
      Approximate weight .690 Pounds Per Inch (without shaft or bearings)
      Available Coatings WINtrac Coatings

  • 6 x 3

    Aluminum Dead Shaft Idler Roller
    • 6 x 3
    • Finished Roll Diameter Wide Web: 6.100/5.990" Narrow Web: 5.970/5.950"
      Total Indicator Run Out (TIR) .0005 Per Foot (.002 Min)
      Surface Finish 16 ra, 32 ra, 64 ra, or 125 ra
      Bore Available WINlock Bore (Bearing protrusion available)
      Bearing Sizes Available 1.5", 2.0", 40mm
      Bearing Type Self Adjusting, ER, Free Spin
      Balanced to Spec G6.3 2000 FPM (or as specified)
      Shaft Diameter Tolerance -.0005 / -.0015 (Ex: 1.5" = 1.4995/1.4985)
      End Cap Standard
      Approximate weight .693 Pounds Per Inch (Without shaft and bearings)
      Available Coatings WINtrac Coatings

  • 8 x 3

    Aluminum Dead Shaft Idler Roller
    • 8 x 3
    • Finished Roll Diameter Wide Web: 8.100/7.925" Narrow Web: 7.835/7.815"
      Total Indicator Run Out (TIR) .0005 Per Foot (.002 Min)
      Surface Finish 16 ra, 32 ra, 64 ra, or 125 ra
      Bore Available WINlock Bore (Bearing protrusion available)
      Bearing Sizes Available 1.5", 2.0", 40mm
      Bearing Type Self Adjusting, ER, Free Spin
      Balanced to Spec G6.3 2000 FPM (or as specified)
      Shaft Diameter Tolerance -.0005 / -.0015 (Ex: 1.5" = 1.4995/1.4985)
      End Cap Standard
      Approximate weight 1.265 Pounds Per Inch (Without shaft and bearings)
      Available Coatings WINtrac Coatings

  • 10 x 3

    Aluminum Dead Shaft Idler Roller
    • 10 x 3
    • Finished Roll Diameter Wide Web: 10.100/9.900" Narrow Web: 9.850/9.830"
      Total Indicator Run Out (TIR) .0005 Per Foot (.002 Min)
      Surface Finish 16 ra, 32 ra, 64 ra, or 125 ra
      Bore Available WINlock Bore (Bearing protrusion available)
      Bearing Sizes Available 1.5", 2.0", 40mm
      Bearing Type Self Adjusting, ER, Free Spin
      Balanced to Spec G6.3 2000 FPM (or as specified)
      Shaft Diameter Tolerance -.0005 / -.0015 (Ex: 1.5" = 1.4995/1.4985)
      End Cap Standard
      Approximate weight 1.481 Pounds Per Inch (Without shaft and bearings)
      Available Coatings WINtrac Coatings

“We operate 12 web presses with zero speed splicers in our operation here in the Twin Cities. On several of our presses we were experiencing surprising wear on our festoon rolls and we reached the point where it was necessary to replace the festoon roll “sets”. The people from Componex convinced us that the rolls could not wear without slipping and recommended we try their patented AV technology on low inertia, low friction rolls to eliminate web slip. We tried this on one of our splicers and based on our experience with that splicer moved to the second press and converted to the AV rolls there. Those vented rolls have eliminated slip and we’ve seen no recurrence of the wear problem.”

Pregunte por los productos Winertia: AV Air Vent

Powered by BreezingForms

Search: